Display values on an I2C screen via ESP8266
|1 min read
This article highlights the use of an I2C OLED screen and an ESP8266 to display values from an MQTT broker.
ESP8266NodeMCUJeedomElectronic
Tagged Articles: Electronic
9 posts
2016(6)
Independent wireless communication via two ESP8266
|1 min read
The challenge of this project is to create your own wireless communication. In this specific case, a wifi and autonomous communication.
ESP8266NodeMCUElectronic
Brightness under Jeedom via ESP8266
|1 min read
This article highlights the setup of a TSL2561 sensor and an ESP8266 to retrieve brightness under Jeedom. Data communication will be through an MQTT broker.
ESP8266NodeMCUJeedomElectronic
Cat food dispenser under Jeedom via ESP8266
|1 min read
To avoid THE daily problem: 'feeding the hungry cat', I built a dispenser connected to Jeedom. This dispenser consists of a simple 12v motor actuated by a double relay and controlled by an ESP8266.
ESP8266NodeMCUJeedomDIYElectronic
Flashing an ESP8266
|1 min read
Guide to flash an ESP8266 with NodeMCU firmware.
ESP8266NodeMCUElectronic
Temperature and pressure (BMP180) under Jeedom via ESP8266
|1 min read
Setup of a BMP180 sensor with an ESP8266 to retrieve temperature and pressure under Jeedom.
ESP8266NodeMCUJeedomElectronic
2014(3)
Ambi-like with 240 WS2812B LEDs and a Teensy 2.0
|3 min read
Building an Ambi-like system with a 4m strip composed of 240 WS2812B LEDs and a Teensy 2.0 to reproduce the computer's video stream on the LEDs.
AmbilightWS2812BTeensyDIYElectronic
Ambi-like with WS2801 strip, Raspberry Pi and Hyperion
|2 min read
Building a DIY Ambi-like system with a 50 LED WS2801 strip, a Raspberry Pi and Hyperion software to reproduce Philips Ambilight effect.
AmbilightWS2801Raspberry-PiDIYElectronic
Chacon DIO First outlet control via Raspberry Pi
|2 min read
First home automation article: controlling Chacon DIO First outlets via a Raspberry Pi and a 433MHz transmitter.
Raspberry-PiDIYElectronic
No posts found