Display values on an I2C screen via ESP8266
|1 min read
This article highlights the use of an I2C OLED screen and an ESP8266 to display values from an MQTT broker.
ESP8266NodeMCUJeedomElectronic
6 posts
This article highlights the use of an I2C OLED screen and an ESP8266 to display values from an MQTT broker.
The challenge of this project is to create your own wireless communication. In this specific case, a wifi and autonomous communication.
This article highlights the setup of a TSL2561 sensor and an ESP8266 to retrieve brightness under Jeedom. Data communication will be through an MQTT broker.
To avoid THE daily problem: 'feeding the hungry cat', I built a dispenser connected to Jeedom. This dispenser consists of a simple 12v motor actuated by a double relay and controlled by an ESP8266.
Guide to flash an ESP8266 with NodeMCU firmware.
Setup of a BMP180 sensor with an ESP8266 to retrieve temperature and pressure under Jeedom.