Temperature and pressure (BMP180) under Jeedom via ESP8266

Materials

• 1 ESP8266;
• 1 BMP180 sensor (temperature and pressure);
• 1 LF33CV regulator (5v to 3.3v);
• 1 1kΩ resistor (pull-up).

Wiring

Jeedom

Create a virtual device.

Make sure to note the IDs of the two information (temperature and pressure), here 535 and 536. These two IDs are to be inserted in the HTTP request to send to Jeedom.

Code

HTTP version

MQTT version

Result