Introduction
During the renovation of my apartment, I needed to create a dedicated space to organize my network equipment. Rather than having cables and equipment lying around, I decided to create a recessed rack structure directly in the hollow partition wall.
Wall Preparation
The first step is to prepare the location in the wall. I first identified the ideal location, taking into account the presence of existing network and electrical cables.
I then cut the hollow partition wall to create a rectangular opening to accommodate the rack structure.
Wood Structure Construction
I built a wooden structure that will serve as a support for the rack rails. The structure consists of four vertical posts and several horizontal crossbeams.
I used pocket hole joinery to assemble the structure in a strong and discreet way. This technique allows for invisible screws from the outside.
Rack Rails Installation
Once the wooden structure was assembled, I mounted the metal rack rails inside. These rails are standardized (19 inches) and allow mounting any standard rack equipment.
The rails are mounted vertically on the wood posts using appropriate screws. It is important to check alignment and level so that equipment installs correctly.
Final Result
The rack structure is now completely integrated into the wall. Network equipment is organized in a professional and discreet manner. The patch panel allows easy management of all network connections.
This solution offers several advantages:
- Hidden and organized equipment
- Easy access for maintenance
- Space saving
