Introduction
After renovating the hallway in the fourth article of this series, it was time to tackle the new entry renovation. This important step in the renovation project involved several works: demolishing the old WC door that had been moved to the north, creating a recess for a closet using part of the old WC, installing telecommunication networks, and replacing the old door with a new modern and insulated door.
This entry renovation was essential to create a functional and aesthetic welcome space, which would serve as a first impression for visitors and optimize the use of available space in the house.
Demolition of the Old WC Door
The first step was to demolish the old WC door that had been moved to the north of the house. This door, which was located in the entry space, was no longer necessary since the WC had been relocated elsewhere. The demolition required removing the door frame, the door itself, and preparing the opening for future work.
This demolition freed up space and prepared the area for creating the closet recess and installing the new entry door.
Creating the Closet Recess
To optimize available space and create a practical storage area, I decided to create a recess for a closet using part of the old WC. This decision allowed us to gain space in the entry while creating functional storage for coats, shoes, and other accessories.
Creating this recess required demolishing part of the wall separating the entry from the old WC, then rebuilding a new partition to delimit the closet space. I used a metal framework (rails and studs) to create the structure, then installed drywall panels to close the recess.
Telecommunication Network Installation
To prepare for the installation of a video intercom and ensure good connectivity in the entry, I created a channel in the brick wall to run RJ45 cables. This channel was carefully dug to allow telecommunication cables to pass while preserving the structural integrity of the wall.
The RJ45 cables were installed in a conduit to facilitate maintenance and eventual replacement. This anticipatory installation prepared for the arrival of the video intercom and other home automation equipment in the entry.
The channel was then filled with render to hide the cables and prepare the wall for final finishing.
Plumbing Preparation for Future Parental Bedroom Bathroom
In anticipation of the future transformation of the old WC into a bathroom for the parental bedroom, I took advantage of this entry renovation to install the necessary plumbing networks. These installations were made in the new wall created for the closet recess, thus preparing for hot and cold water supply for the future bathroom.
Entry Door Replacement
The old entry door, dating from the 1970s, no longer met our expectations in terms of thermal and acoustic insulation, nor aesthetics. I therefore decided to replace it with a new modern and insulated door.
Finishing and Fitting
For the entry finishing, I chose wallpaper with a tropical pattern (palm and monstera leaves) that adds a touch of color and personality to the space. This wallpaper was applied to the back wall of the recess, creating an interesting focal point in the entry.
The closet was fitted with light wood shelves for storing coats, shoes, and accessories. Hooks were installed to hang coats, and a bench was integrated into the recess to facilitate putting on shoes.
The side walls of the entry were painted white to create a bright and modern space, in contrast with the colorful wallpaper of the closet.
Final Result
The new entry renovation is now complete. The result is a functional, aesthetic, and modern space that serves as a first impression for the house. The recess with closet offers practical and well-organized storage, while the new insulated door improves the thermal and acoustic comfort of the house.
The anticipatory installation of plumbing and telecommunication networks will facilitate future work, particularly the transformation of the old WC into a parental bedroom bathroom.
Conclusion
The new entry renovation is now complete. This step has allowed us to create a modern and functional welcome space, while preparing the necessary installations for future work. This project taught me to better plan installations by anticipating future needs, particularly installing plumbing and telecommunication networks in advance.